Interview with Damien Chaboud - Planche Mag July 2020

By damchab
On 15/09/2020
0 comments

In July, the magazine Planche Mag came to meet us for their category "Made in France".

Proud to be able to be part of it, we are very happy to share this interview with you.

TO FIND HERE: https://www.planchemag.fr/2020/07/fabrique-en-france-alpinefoil/

TEST Windfoils AlpineFoil Lac de Monteynard

By eleanore
On 07/07/2020
0 comments

Meet us on Sunday 12 July at Camping de Savel to test the Alpinefoil windfoils on Lake Monteynard!

Test/Customer review on the Wing Race M 580

By magchab
On 19/05/2020
In News
0 comments

An expected return to the water ... we share that of Raphaël who was finally able to launch his new Race M580 and enjoy the gliding sensations again.
Find all the details of this Wing which completes the Race range on its dedicated page https://www.alpinefoil.com/en/kitefoil-hydrofoil-foilboard-pages/kitefoil-wing/aile-race-m580-eng.html

The Ultralight at AlpineFoil 2020

By magchab
On 25/02/2020
In News
0 comments

Release for 2020 of the Ultralight project with the AlpineFoil Air generation, a small revolution at AlpineFoil with freeride, wave, freestyle and jump foils.
Today the foil is everywhere and interests all supports, Kite foil, Wind foil, Surf oil, Sup foil, Wing foil.

This transition has accelerated development at AlpineFoil, which has fully adapted its technology to stick more closely to this new market dynamic which offers great development opportunities in Kite foil, Wind foil, Surf oil, Sup foil, Wing foil.
Our Ultralight project started in this context with the development of a whole new technology, the AlpineFoil AIR technology which will allow AlpineFoil to offer you both ultra light foils and extremely rigid and solid foils totally adapted for new practices. emerging from Wing foil, Surf foil and Sup foil and satisfy freeride, wave and Big Air enthusiasts.

Customer Review of KiteFoil Rave with Wave wing 1200

We share with you 2 nice feedback with the Kite Foil Rave and Wave 1200. 2 experiments signed by Raf Ladin with the Board FS2 and Fabien Gauthier with the Pocket FS3-XS 2020.
Raf is with the board FS2 and Fabien with the pocket FS3-XS 2020.

Thanks to them.

Customer reviews kitefoil Alpinefoil Rave - VR6 2020

By magchab
On 07/11/2019
0 comments

The little shot of Peps at AlpineFoil this week ... We do not regret having cracked.

We wanted to share with you the return of a customer following the purchase of his AlpineFoil Rave.
It is this type of return that makes you want to continue to develop products and to believe in our Made in France production. The goal for us is to satisfy our customers more and more about the quality and especially the pleasure of skiing.
Our explanations and the attention we strive at best to bring to each customer, to advise him on the best adapted product is really the philosophy and the little more that we try to bring.

Patrice thank you for this good boost for the team who wishes you a good progress with your new toy.

«Patrice The 04/11/2019
After my first foil a lot of hesitation before moving to a new product
Call to ALPINEFOIL conseil by Damien CHABOUD directly
Decide to go there on the occasion of a trip to see the products in the showroom (I needed to see the products)
Welcome by Damien CHABOUD directly and true debacle on the products Alpinefoil ... but I would not have had, I cracked: Purchase a rave associated with the board VR6 2020 (yes, I broke my piggy bank and it is true that I hesitated between the access carbon and VR5)
Well I must say that I was good wall and the finish is top with a bonus visit of the factory
Back in the Atlantic Loire with the combo and test in complicated conditions on the first two outputs, a lot of waves and current, disappointment .... Call to Alpinefoil for adjustments and advice. Damien even confirms the placement of the straps and calles and even propose settings if I want to find the same behavior as my old foil but remains on these initial advice and settings, and he was right
New test last week and it's gone live. impressive, all the advice proved to be accurate. Now it's up to me to progress because far from the capabilities of the machine in any case see the photo no equivalent in terms of finish and evolution (it's just a killer to watch) to follow but super happy from my investment I look forward to trying it now in very light conditions to see how far we can go with it. To be continued...
Patrice«

Presentation of the new Kitefoil Access Carbon 2019

By jeremie
On 22/10/2018
In News
0 comments

Hugo Chaboud presents the latest model Access Carbon 2019! Perfomant, light, manageable, accessible, this kitefoil has everything to seduce you. Featuring the latest technologies of the brand AlpineFoil including the now famous sacrificial anode.
This kitefoil is now supplied with the front wing Lift which was the great success of the year 2018 and will now equip all our foils. Indeed, AlpineFoil wants to offer to all its customers the comfort in navigation, a low wind start and increased stability thanks to this new wing Lift.

All the details on the Access Carbon 2019 in the video!

Presentaion of the range Windfoil A1 and the Board AWF2 by AlpineFoil

By jeremie
On 17/10/2018
In News
0 comments

Meeting with the AlpineFoil Team, they tell us all the useful information about the new WindFoil product range with the presentation of the A1 aluminum and A1 Carbon as well as the new AWF2 windfoil convertible windsurf board.

Damien, Hugo and Steeve explain their vision of windfoil and their feelings in navigation. You will know everything on the different technologies used on these new products such as the sacrificial anode, the different carbon finishes, the materials used as well as the recovery plates.