PumpFoil HAWK V3.12 Carbon 78 New

The Hawk V3.12 carbon pumpfoil: light, stiff and precise.

One-piece 78 cm carbon mast, US Rail plate
Patented S-Shape anti-ventilation
Designed and built in our workshop in the French Alps

Monday - Thursday: 8am-12pm 2pm-7pm - Friday: 8am-12pm

+33 4 58 00 57 80 Info / Quote WhatsApp

Aile avant (Front Wing)

Carbone

Fuselage (Fuselage)

Availability: In stock

VENTE FLASH 311026

2 229.00€ inc. tax 2 146.10€ inc. tax

1 857.50€ excl. tax 1 788.42€ excl. tax

reduction of 82.90€

PumpFoil HAWK V3.12 Carbon 78

Condition : new

ALPINE BOARD SURF SURFOIL supfoil wakefoil wingfoil CARBONE Foil CARBONE BOARD ALPINE SURF SURFOIL supfoil wakefoil wingfoil

Complete foil · Pumpfoil · Dockstart · Made in France

Hawk V3.12 Carbon 78: stiffness that pays off when pumping

One-piece mast and plate in continuous fibre, 14 mm in the water, 20% stiffer than the V3.0. A precise pumpfoil built to go the distance.

78 cmcarbon mast

14 mmin the flow zone

+20%stiffness vs V3.0

Key features

MCF technology: one-piece mast and plate, lighter and stiffer than a bonded plate
Patented S-Shape anti-ventilation system
Forward anchor point for more natural turn entry
3D shape: thick at the plate, 14 mm at the fuselage
Aviation aluminium fuselage with anode, or 100% corrosion-proof titanium

Ideal for

Intermediate to expert riders for pumpfoil, dockstart and long-distance pumping. Also at home kitefoiling, surf foiling, SUP foiling and wakefoiling.

Pairs well with

Optimised for DW and RS wings. Pierra Manta 1760 for long-distance pumping, DK 1360L for an easy dockstart.

Designed and built in our workshop in the French AlpsEuropean Hexcel carbonIn-house engineering officeCompatible with the whole range since 2010Need advice? +33 6 73 19 37 23

Alpinefoil Hawk V3.12 foil - 78 cm

Main features:

2026: Version 3.12 UHM or HM
New construction, new even higher-performance UHM carbon
20% stiffer than version 3.0

Mast length: 78 cm
Thickness: 14 mm in the flow zone
Hydro profile: HAWK V3
Material: available in two carbon versions:
- HR High Resistance (recognisable by its White / Orange sticker)
- HM High Modulus (recognisable by its Blue / Red / White sticker and the UD high modulus carbon strip on the leading edge)
  38% stiffer for the HM version than the HR version (measured on a test bench)
Continuous-fibre monobloc plate: US Rails spacing compatible, for easy installation.
- No fibre break between the plate and the mast
- No bonding between the box and the mast
- No fibre break on top of the plate
Fuselage machined from aviation aluminium with a sacrificial anode for better corrosion resistance (a marine technology), or titanium fuselage
Compatible with all Alpinefoil foil wings since 2010
Wide choice of Wingfoil wings, optimised for the DW and RS wings
Compatible with kitefoil / Surf foil / SUP foil / Foil Pumping / Dockstart / WakeFoil
Made in France (in the Alps since 2007)

Alpinefoil MCF (Monobloc Continuous Carbon Fiber) Technology:

The mast has a “4-Hole Plate” housing integrated directly within the mast fibers, making it lighter and stiffer than a standard mast with a glued-on plate.
S-Shape AlpineFoil Patent: The S-shaped anti-ventilation system advances the mast on the fuselage, preventing ventilation or stalling regardless of speed.
Advanced Fixing Point: The mast is positioned further forward on the fuselage, offering a more intuitive and natural turn initiation. When the foil begins a turn, it follows the curve naturally without pilot input, similar to the way a parabolic ski turns compared to a straight ski.
3D Shape: The mast shape evolves along its entire length, with greater thickness near the housing for increased rigidity, while remaining slimmer (14 mm) near the fuselage for improved glide without compromising rigidity.

Conclusion

Suggestions

Kitefoil Torx driver tool
- 55 ratings.
Torx mounting compact key, allowing an optimal tightening of the elements of your foil, this key ensures...

17.50€ inc. tax
14.58€ excl. tax
Details
Tef Gel
- 7 ratings.
TEF-GEL By TIKAL - Marine anti corrosion grease 10g tube - to be applied every 2 weeks.

14.80€ inc. tax
12.33€ excl. tax
Details
Wingfoil Rake shim

Rake adjustment shim for US Rail system, allows to optimize the take-off of the foil in the light wind...

26.00€ inc. tax
21.67€ excl. tax
Details
M6 M8 T-Nuts US Rail OPTION

T-Nuts M6 & M8 (not supplied) compatible for US Rail self-locking screws Quantity : x4 Compatible...

39.00€ inc. tax
32.50€ excl. tax
Details
Polo Alpinefoil
- 4 ratings.
POLO AlpineFoil 240gr/m² 100% cotton with embroidery Sizes: S,M,L,XL,XXL

From
49.00€ inc. tax
40.83€ excl. tax
Details
Foil wing cover SIDEON 115x25

Wingfoil/Windfoil compatible foil cover Size XL 115x25 ideal for DW1680 , DW1370 and Regatta 1100 High...

42.90€ inc. tax
35.75€ excl. tax
Details
Stabilizer Wing Bag SIDEON 50x15

Stabilizer cover Size 50x15 ideal for Standard Wing, Performance , SHA239 and SHA188 stabilizers allow...

34.00€ inc. tax
28.33€ excl. tax
Details
stabilizer Bag SIDEON 40x15

Cover for Stabilizer Size 40x15 Perfect for Stabilizer HA208 or HA175 High strength, 5mm padded,...

34.00€ inc. tax
28.33€ excl. tax
Details