Length 95 cm - 100% Carbon
One-piece plate (US rail compatible)
Kitefoil / Wingfoil
The high-performance carbon mast by AlpineFoil in its 95 cm version, developed for wingfoil and kitefoil
Alpinefoil technology MCF (Monobloc Continuous Carbon Fiber): this mast has a "4-hole plate" box built directly into the mast fibres.
It is therefore lighter and stiffer than a conventional mast with a bonded box.
Patented AlpineFoil S-Shape anti-ventilation system - shape in S with the mast reaching forward on the fuselage: no ventilation or stall when riding, whatever the speed
Mast attachment point moved forward on the fuselage for more intuitive, natural turning than a rearward position. As soon as the foil starts into the turn, it follows it naturally with no input from the rider (like a carving ski versus a straight ski)
3D SHAPE for more stiffness thanks to progressive 3D width, thickness and height
This mast's shape changes along its whole length: thicker at the box for greater stiffness, but thinner at the fuselage to increase glide without compromising stiffness.
Key strengths ?
- V3: version 3.0 of the Hawk mast,
- new mast profile (Alpinefoil moves to a new, higher-performance hydrodynamic profile: more glide, less drag, more stiffness, better upwind angle)
- new outline: the shape at the plate has been reworked in two dimensions and widened to improve control and stiffness in the upper section
- reworked plate, new fillets to increase fibre performance in the load areas.
- 95 cm:
- It gives much more range in manoeuvres and makes tacks and jibes easier
- Upwind (big gain in upwind angle, ideal for cruising, covering distance or racing)
- big gain in stability at high speed, it is much easier to hold high speeds
- Much more tolerance in waves, easier riding
- One-piece:
- Thanks to its manufacturing process, no joint is visible between the mast and the box: the mast and the plate are made as one single piece
- a very significant gain in strength and stiffness compared with a plate bonded onto a carbon profile (the traditional construction of carbon masts)
- 3D SHAPE:
- the width and thickness of the mast vary in 3D along its whole height: optimised stiffness and glide
In short, the Plate Mast 95 completes the range of carbon masts by Alpinefoil for wingfoil and kitefoil , discover new sensations!
Note that the Plate Mast 95 is available with the Hawk Carbon for wingfoil, and the Rave Air for kitefoil.
Discover our nut system for US rails
Tip: if you own an older AlpineFoil kitefoil, this mast lets you use it for wingfoil or with any board with a US rail connection
The base of this mast is a double-screw conical base, compatible with all Alpinefoil foils with an S-mast since 2015
